Vortek Hotend Change System — automatically swaps hotends instead of repeatedly purging one nozzle.
Up to 7 filaments/colors in a print with minimal/no purge waste when configured with the appropriate hotends.
Up to 24 materials when combined with multiple AMS units.
AMS 2 Pro included in the H2C AMS Combo, providing automatic filament management and smart drying.
350°C maximum nozzle temperature — suitable for engineering materials.
120°C heated bed.
65°C active chamber heating, useful for ABS, ASA, PA, PC and other high-temperature materials.
1000 mm/s maximum toolhead speed and up to 20,000 mm/s² acceleration.
Automatic nozzle-offset calibration with inductive sensing.
8-second induction heating for rapid hotend temperature changes.
AI/computer-vision monitoring with multiple cameras and sensors to detect printing problems.
Enclosed chamber + air filtration for engineering-material printing.
Hardened-steel nozzles/gears, making it suitable for abrasive CF/GF filaments.
Build volume: roughly 330 × 320 × 320/325 mm, depending on single/dual-nozzle configuration.
The Vortek system is the standout feature. Instead of using one nozzle and wasting a lot of filament every time you change color, H2C physically changes the hotend. That makes multi-color/multi-material printing much faster and dramatically reduces purge waste.
