The ELEGOO Mercury Plus V2.0 is a compact 2-in-1 resin 3D printer washing and UV-curing station. It combines cleaning and post-curing in one unit.
2-in-1 washing & curing: Wash your resin prints and then UV-cure them using the same machine.
Two washing methods:
Wash with build platform: You can clean the model without removing it from the printer's build plate. The adjustable support accommodates models up to 120 mm high.
Wash in basket: Remove the print and place it in the cleaning basket; the maximum model height is 160 mm.
Sealed washing system: Helps reduce alcohol/IPA vapor during washing, so the container doesn't need to remain open during operation.
360° curing: A rotating turntable exposes the model from different angles for more uniform curing.
16 × 405 nm UV LEDs: Eight high-power LEDs are installed in each of two rows for stronger UV curing.
Anti-UV cover: Blocks 99.95% of UV rays, providing additional protection during curing.
Fanless curing: The V2.0 uses a fanless design, making curing quieter than the previous generation.
Touch controls: The front display shows the selected time and remaining time, and the machine gives an audible notification when the cycle finishes.
Adjustable timer:0–30 minutes for washing/curing.
Wide compatibility: Designed for most LCD, DLP and SLA resin printers, including ELEGOO and other brands.
