4 independent toolheads — print up to 4 colors/materials in one job.
SnapSwap— toolhead changes take about 5 seconds, rather than feeding different filaments through one nozzle.
Low-waste multi-color printing — because each material has its own extruder/nozzle, it avoids the large purge volumes common with single-nozzle color changers. Snapmaker claims up to 80% less purge waste.
Fast printing — up to 500 mm/s toolhead speed and 20,000 mm/s² acceleration.
270 × 270 × 270 mm build volume.
300°C maximum nozzle temperature and 100°C heated bed.
Automatic calibration, including mesh bed leveling, input shaping/vibration compensation, pressure advance, flow compensation, and automatic toolhead-offset calibration.
Automatic filament system — auto-loading, RFID filament recognition, and backup-spool switching when supported.
Materials: PLA, PETG, TPU, PVA and PCTG out of the box; with the optional top cover, it supports materials such as ABS, ASA, PA, PC and PET. Hardened-steel hotends extend compatibility to fiber-reinforced materials.
CoreXY motion system for high-speed movement.
2MP chamber camera with AI-assisted print monitoring/detection features.
Wi-Fi + USB, 3.5-inch touchscreen, and control through the Snapmaker app.
Runs Klipper firmware and supports Snapmaker Orca / OrcaSlicer.
